Floriani Heat N Gone®

Heat Removable Topping and Stabilizer

Use this clear, 100% heat removable film as a topping or stabilizer on all fabrics that can withstand an iron temperature of 260° - 300° F (120°-140° C). Great when giving a gift and you need instant stabilizer removal or when your fabric cannot withstand moisture.

• Clear and Easy to see through
  
• Easy to remove
  
• Embossed backside prevents curling and shifting
  
• Perfect for fabrics that can't be wet such as velvet, wool, satin, etc.
  
• Trace intricate quilt patterns onto Heat N Gone® for an easy guide when free motion quilting or thread painting.
  
• Prevents loops from sneaking back through on high pile fabrics such as towels and terry cloth.

To use as a topping:

To use as a stabilizer:

1. Place a piece of Heat N Gone® within the hoop with the item to be embroidered. Use a piece at least one inch larger than the outer perimeter of the hoop and place the bumpy side of the stabilizer against the fabric.
   
2. Embroider the design.
   
3. Tear away as much of the Heat N Gone® as possible.
   Place your heated iron directly on top of the garment to remove the excess stabilizer. Be sure your iron temp is at least 260°F (120°C). This temperature should be similar to a high wool setting on most household irons.

*To clean your iron of any residue, heat the iron up to its highest temperature and move the irons surface back and forth over a wet towel firmly. Iron cleaners such as Dritz and Niagra work also.

Product Identity

FHG10 10” x 10yds
FHG25 10” x 25 yds
FHG2010 20 x 10yds